* feat(cli): add ping-peer CLI and MCP ping_peer for peer messaging
Promote resume-if-inactive + wait-active + POST message into a first-class
CLI command and session MCP tool so agents stop reinventing JWT+curl.
Fixes#1194
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): do not auto-approve MCP ping_peer
Cross-session messaging can resume a peer and inject a prompt, so keep
permission-mode gating (Codex PR review Major on #1195).
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): require approval for ping_peer in read-only mode
Read-only auto-approve treated non-write names as safe; ping_peer can still
resume a peer and inject prompts, so gate it like a write tool.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): keep ping_peer out of Claude --allowedTools
toolNames still registers the MCP tool, but Claude auto-allow must not
pre-approve cross-session resume+inject without a permission prompt.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): re-check session active before ping-peer send
List/get can race; POST /messages still 409s if the target flips inactive
before send. Resume+wait again (and re-gate pi) immediately before POST.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
- Raise message page size 50 -> 200 (hub max) so cold loads and load-older
show more than a handful of rendered bubbles
- Flush pending messages when the thread forces scroll-to-bottom on mount,
and re-read atBottom after the latest fetch instead of using the stale
pre-fetch snapshot, so new messages no longer stay invisible after
leaving and re-entering a session
- Base the cold-load backfill floor on rendered conversation identities:
skip non-rendering rows (token-count/ready events, un-normalizable
content) and collapse tool call/result pairs into one card identity
* feat(hub): native companion (FCM) push channel + device registry
Adds opt-in FCM HTTP v1 notification delivery so a companion mobile/wearable
app can receive permission, ready, and task notifications end-to-end. The
channel is gated entirely on FCM_SERVICE_ACCOUNT_PATH + FCM_PROJECT_ID being
set; operators not running a companion see zero behavior change.
What lands:
- POST/DELETE /api/devices/register — JWT-authed FCM token registry,
upsert on (namespace, deviceId, platform), platforms `phone` | `wear`.
- Sqlite v9 → v10 migration adds `fcm_devices` (idx on namespace + token).
- FcmService — minimal HTTP v1 client, RS256 service-account JWT via
jose (dep already in tree), 5-minute access-token cache, 401 retry.
- FcmNotificationChannel — implements NotificationChannel, sends data-only
FCM (so companion can route to phone+watch surfaces). Body composition
parses an optional trailing `AGENT_NOTIFY_SUMMARY {json}` line for richer
ready summaries; truncates plain assistant text to 280 chars otherwise.
Tags each payload with `severity` (info/warning/success/error) so clients
can color/categorise the notification.
- PushNotificationChannel gains a NativeFallbackProbe — when a namespace
has at least one registered FCM device, web-push and SSE in-page toast
are skipped so the operator does not double-notify on phone+browser.
Probe is no-op when no FCM device is registered; PWA-only setups
unchanged. Branch trace gated on HAPI_NOTIFY_DEBUG=1.
- shared/src/messages.ts — `extractAssistantPlainText` (codex + Claude SDK
shapes) and `extractNotifySummary` (strict end-anchored line parser).
- hub/src/notifications/toolArgs.ts — tool-arg formatters lifted out of
telegram/sessionView (kept duplicated there in this PR; refactor of
Telegram is a follow-up).
- docs/api/native-companion-contract.md — payload + endpoints + env vars,
versioned at contract v1.
Test coverage:
- 260 hub tests pass (incl. 23 new across FCM channel, push dedup,
v10 migration, devices route).
- 60 shared tests pass (messages parsers).
Notes for reviewers:
- Reference companion implementation lives in a separate Android repo
(Kotlin, phone APK + Wear OS APK) — this PR is hub-side only.
- No new runtime deps (`jose` and `zod` already declared in hub).
Co-authored-by: Cursor <cursoragent@cursor.com>
* docs(contract): clarify scope - companion is remote-hub client, not hub-on-phone
Adds a Scope section to the native-companion contract so anyone
implementing it knows the audience: operators running the hub on a
server who want phone/watch as a notification surface, not users
expecting a Termux-bundled hub. Mirrors the framing now in
heavygee/hapi-companion README.
Co-authored-by: Cursor <cursoragent@cursor.com>
* docs(contract): correct Scope section - hub topology is unchanged
Removes the prior framing that referenced a non-existent 'Termux
hub-on-phone' alternative. This contract describes a native client to
the same hub the PWA talks to; it does not change where the hub runs.
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(web): companion app pairing QR in Settings
Companion section in Settings renders a QR code encoding the deeplink
hapicompanion://bind?hub=<base>&code=<token>. Scanning it from the HAPI
companion app (Android phone or Wear OS) auto-fills the bind form and
authenticates against this hub - no manual URL/token paste.
QR is gated behind a Show button so the access token doesn't sit visible
on screen by default; a Copy link affordance and the textual deeplink
are also exposed for manual onboarding.
Adds qrcode + @types/qrcode to web/ (already a hub dep, no new resolved
package - just a workspace declaration).
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(hub): terminal QR for companion app pairing alongside PWA QR
After the existing PWA access QR is rendered on tunnel start, also print
the hapicompanion://bind?hub=...&code=... deeplink and a matching QR.
Same tunnel + token, different scheme: phones with the companion app
installed pick up the deeplink via the manifest intent filter; phones
without it ignore it and fall back to the PWA QR above.
QR rendering failure is non-fatal in both cases - the textual deeplink
above the QR is sufficient for manual paste.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(fcm): address HAPI Bot review on PR #803
Two bugs surfaced by the upstream review bot:
1) Web Push silently dropped when FCM is not actually configured.
The native-fallback probe only checked the device registry; it did
not check whether resolveFcmConfig() actually succeeded. So an
operator who previously enabled FCM, registered a phone, then later
started the hub WITHOUT FCM_SERVICE_ACCOUNT_PATH would see the probe
return true (devices still in DB) -> Web Push suppressed -> no FCM
channel registered -> notifications go to /dev/null.
Fix: extracted the probe construction into buildNativeFallbackProbe()
which short-circuits to () => false when fcmConfig is missing. Probe
never even consults the device store in the no-config branch, so
stale rows can never matter.
2) Transient FCM failures permanently unregistered devices.
sendToToken() returned a single boolean and sendToNamespace() removed
any device whose send returned false. A 429 (rate limit), 503
(server error), 401 (auth glitch), or even an ECONNREFUSED would
delete the device row, after which the user would need to re-pair to
get notifications again. The bot caught it; the fix is the obvious
one.
Fix: sendToToken() now returns 'sent' | 'invalid' | 'failed'.
- 'invalid' is reserved for the responses that genuinely indicate a
dead token: HTTP 404 with UNREGISTERED/NOT_FOUND, and HTTP 400
with INVALID_ARGUMENT explicitly referencing the token field.
- Everything else (429, 5xx, 401, 403, network errors) is 'failed'
and counts toward the failed tally without removing the device.
sendToNamespace() only calls removeDeviceByToken() on 'invalid'.
Tests: 11 new tests across two new files. fcmService.test.ts covers
all six branches (200, 404 unregistered, 429, 503, 401, network error)
plus a mixed-batch case that proves invalid tokens get removed in the
same call where transient-failure tokens survive. nativeFallbackProbe
.test.ts covers both no-config and configured branches plus the
explicit "no-config never touches the store" guarantee.
Hub test count: 273 -> 284 (all passing).
Co-authored-by: Cursor <cursoragent@cursor.com>
* docs(contract): correct FCM visibility rule and remove unsupported event type
HAPI Bot review on PR #803 caught two contract-doc accuracy gaps:
1) Visibility rule was wrong. Doc said "FCM fires when Web Push would
fire AND client not visible via SSE", but FcmNotificationChannel
ALWAYS fires regardless of PWA visibility (deliberately - native
companion is the canonical wrist-first surface, and there is a
passing test asserting this). Companion app implementers reading
the contract would have built foreground-suppression logic and
then dropped notifications when the PWA tab was open.
2) Documented `session-completed` event doesn't exist. NotificationHub
never calls into a 'session-completed' channel method on
FcmNotificationChannel; the type would never reach a native client.
Removed from the documented enum, leaving only the three actual
events: ready, permission-request, task-notification.
Co-authored-by: Cursor <cursoragent@cursor.com>
* docs(contract): drop trailing whitespace, use blank line for paragraph break
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): persist CLI access token after Telegram bind so pairing QR works
The Settings -> Companion pairing QR reads the original CLI access token
from localStorage (hapi_access_token::<baseUrl>) so it can be encoded into
the hapicompanion://bind deeplink. For browser/CLI logins useAuthSource
already persists the token via setAccessToken, but the Telegram Mini App
bind path went through useAuth.bind() which exchanged the typed CLI token
for a JWT and never persisted it. Telegram users therefore always saw the
"signed in via Telegram..." fallback and got no usable QR.
After a successful client.bind() we now mirror useAuthSource's behavior
and write the same accessToken to the same localStorage key, restoring
parity between the two auth paths. No change for browser/CLI users.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(fcm): gate native-fallback probe on rolling FCM health
The native-fallback probe previously returned true whenever FCM was
configured AND devices were registered, which suppressed web-push for
the namespace. The HAPI Bot correctly pointed out the gap: if the FCM
pipeline silently breaks (expired service-account key, sustained 5xx,
OAuth token-fetch failure, network blackhole) the operator gets nothing
on either channel until they manually intervene.
Approach (deliberate, not the bot's exact suggested fix):
- FcmService now keeps a small rolling window (last 8 outcomes) of send
attempts and exposes `isHealthy()`. The threshold is 5+/8 failures =
unhealthy; the buffer starts empty so a freshly-booted hub is
optimistic ("innocent until proven guilty") and does not double-fire
on event #1.
- Token-fetch failure (`getFcmAccessToken` throws) now records exactly
one health-failure (not one per device), short-circuits the send
loop, and returns a result so `sendToNamespace` no longer leaks the
exception.
- `invalid` token responses are explicitly excluded from the health
buffer because they are per-device facts (rotated/uninstalled token),
not pipeline failures - FCM was reachable, it just rejected one
stale token.
- `buildNativeFallbackProbe` now optionally accepts the FcmService and
short-circuits to "let web-push fire" when health is bad, before it
even queries the device registry. The single-arg call shape is still
supported for back-compat.
Why not the bot's exact suggestion ("invert: call FCM first, fall back
on result.sent === 0"):
- Couples PushNotificationChannel to FcmService and FcmSendPayload,
reversing the clean parallel-channel architecture established earlier
in this PR.
- Treats every transient single-event failure as fallback-worthy, which
re-opens the duplicate-notification race that the suppression logic
was added to close (FCM HTTP timeout that delivers later + the web
push we sent in the meantime = two pings).
- A rolling health window only flips on sustained breakage, which is
the actual operational scenario the bot is worried about.
The wrist-first design intent ("FCM fires unconditionally, web-push is
suppressed for the same namespace") documented in
docs/api/native-companion-contract.md is preserved on the happy path.
The probe only re-enables web-push when there is concrete evidence the
native pipeline is not delivering.
Tests:
- New FcmService.isHealthy suite covers empty-buffer, threshold flip,
recovery as failures age out of the window, invalid-token exclusion,
and network-error path.
- nativeFallbackProbe gains coverage for the unhealthy-but-registered,
healthy-and-registered, and absent-fcmService (back-compat) cases.
- All 292 hub tests still pass; typecheck clean.
Co-authored-by: Cursor <cursoragent@cursor.com>
* refactor(telegram): drop duplicate tool-args formatter, use shared module
The Telegram session view had its own copy of formatToolArgumentsDetailed
identical to the one in hub/src/notifications/toolArgs.ts (already used by
the FCM channel). Replace the local copy with an import.
Removes ~70 lines of duplication, plus the now-unused MAX_TOOL_ARGS_LENGTH
constant and `truncate` import. The shared signature accepts an optional
opts arg whose default maxArgLength is 150 - matching the prior constant -
so the call site is unchanged.
Two benign upgrades come along for the ride from the shared module:
?? instead of || on field fallbacks (no real-world difference; permission
arguments never carry empty-string fields), and String(...) wrapping plus
a typeof object guard that makes non-string values render gracefully
instead of throwing into the catch block.
Hub tests: 311 pass / 0 fail. Telegram subset: 5 pass / 0 fail. typecheck
green.
Cold-reviewed by an out-of-context Claude Opus peer before push.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(fcm): require positive evidence in health window before suppressing web-push
Addresses HAPI Bot Major review on PR #803.
The previous health gate treated an empty outcome buffer as healthy
("innocent until proven guilty"). That created a silent-blackhole window
on cold start with broken FCM credentials: the push channel suppressed
SSE/Web Push for the first ~5 events while the FCM channel attempted
each delivery and recorded failures, until enough stacked to flip the
threshold. Every notification in that gap was silently lost.
New invariant: isHealthy() requires at least one successful FCM send in
the recent window (HEALTH_WINDOW=8) AND failures below threshold
(HEALTH_FAILURE_THRESHOLD=5). Both conditions are necessary; either
alone is insufficient evidence to safely suppress web-push fallback.
Trade-off: one duplicated notification per hub restart per namespace.
On the first event after restart, web-push fires alongside FCM (because
the gate has no positive evidence yet). Once FCM records that first
success, the gate engages and subsequent events are FCM-only. Worth it
for guaranteed delivery during cold-start outages.
Tests reworked to match new semantics:
- "starts UNHEALTHY with empty buffer" (was: healthy)
- "flips to healthy after first successful send" (new)
- "stays unhealthy across failures-only run" (new, exercises the exact
blackhole scenario the bot flagged)
- "flips back to unhealthy after threshold breach with prior successes"
(renamed, establishes successes first)
- "invalid tokens don't count against health" (reworked: send a mixed
batch first to establish health, then verify invalids don't flip it)
- "network errors count as failures" (reworked: establish health first)
Hub tests: 313 pass / 0 fail. typecheck green.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): bump FCM migration to V10→V11 after upstream service_tier V9→V10
Upstream/main landed sessions.service_tier at schema v10. The companion
FCM device registry now migrates at v11 so both changes compose cleanly
after the courtesy rebase onto current upstream/main.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): per-dispatch native gate instead of stale FCM probe
FCM runs before web-push; PushNotificationChannel skips web/SSE only
when the same notify() dispatch already delivered via FCM. Removes the
isHealthy()+device-row probe that could suppress web-push after warm
FCM outages.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub,web): cap notifySummary for FCM limits; fix PWA test cast
Rebase follow-up: truncate AGENT_NOTIFY_SUMMARY summary/action before
FCM data payload (bot Major). Fix usePwaUpdate.test.ts setTimeout mock
cast so bun typecheck passes on current main.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): cap all FCM notifySummary fields and task bodies
Whitelist and truncate AGENT_NOTIFY_SUMMARY auxiliary fields before
JSON serialization; cap task-notification summaries to glance limit.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): FCM fetch timeouts and cap Grep/Glob permission args
10s AbortSignal.timeout on OAuth + FCM send so sequential web-push
fallback is not blocked on hung Google endpoints; truncate Grep/Glob
pattern in permission detail formatter.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): bind FCM token to one namespace on re-pair
Delete stale fcm_devices rows sharing the same token when a native
install registers under a different namespace.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): localize Companion settings and pairing copy
Add en/zh-CN keys for the Companion section title and CompanionPairing
strings; matches locale-driven Settings pattern (bot Minor on #803).
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): tighten FCM token-invalid detection and truncation edge cases
Parse FCM error JSON: only UNREGISTERED or token-field INVALID_ARGUMENT
unregister devices; generic NOT_FOUND stays transient. Guard limit<=3
in truncateReadyText so tiny action budgets cannot blow the glance cap.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(hub): parse FcmError details.errorCode for UNREGISTERED tokens
FCM v1 often returns HTTP 404 with root NOT_FOUND plus
details[].errorCode UNREGISTERED; prune those tokens while keeping
generic project/resource NOT_FOUND transient.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): mock AppContext for About Companion pairing in settings tests
Settings About now mounts CompanionPairing via useAppContext after the
#1027 hub redesign rebase; wrap the About route test with AppContext and
Companion mocks so the suite stays green.
Co-authored-by: Cursor <cursoragent@cursor.com>
* docs(contract): point companion auth at POST /api/auth, not /api/bind
Pairing QR carries the CLI access token as `code`. /api/bind requires
Telegram initData; native companions must use /api/auth with accessToken.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): mount Companion pairing under Settings General
About is version/links only after the settings hub redesign; pairing is
setup, so keep Companion with language prefs and update the route tests.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Debian <heavygee@oos-linux.in.lockhouse>
* refactor(web): add per-line shiki line-splitting helper
* feat(web): add global word-wrap toggle for code, markdown, and diff views
* feat(web): add a shaded gutter background behind line numbers
* fix(web): make DiffView compact rows follow the global wrap setting
* fix(web): trust live hub connectivity over navigator status
* fix(web): align offline and reconnecting banner precedence
* test(web): provide i18n context to banner tests
Hub: getOrCreateMachine now merges incoming machine-owned metadata over
the stored row (first-write-wins previously kept rows registered without
a host name nameless forever; hub-only fields like displayName survive).
Web: session-list machine labels are cached in localStorage so machines
whose row is gone or whose query has not loaded yet keep their last
known name instead of flickering to the 8-char id prefix.
useLongPress binds both touch and mouse handlers. After a tap, touch
browsers emit compatibility mouse events (~300ms later) that the page did
not preventDefault, so onClick fired twice: once from touchend, once from
the synthesized mouseup. On the wide tablet sidebar layout the list stays
under the finger, so the second onClick lands on whatever row slid into
that position and navigates to the wrong session.
preventDefault() on touchend for every handled tap, and additionally
swallow mouse events that arrive within 700ms of a touch so browsers that
still dispatch the compatibility sequence cannot re-trigger onClick.
Based on the fix by RiriAgent in the fork (commits 1bbfcc20, 5e3d135a).
Co-authored-by: RiriAgent <39219425+RiriAgent@users.noreply.github.com>
- prepare-npm-packages: exit(1) instead of warn-and-continue when a
platform binary is missing, so a broken build aborts the release
- release-all: after publishing platform packages, poll npm view for
every @twsxtd/hapi-<platform> package until it matches the release
version (10min timeout, 15s interval) before publishing the main
package
Fixes#1149
SessionChat fetched Codex models through the session-scoped endpoint,
so the CLI listed models in the session process cwd, where a missing
directory or project-level Codex config could skew or break the result.
Use the machine-scoped endpoint (already used by NewSession) and drop
the now-unused session route and RPC plumbing.
Fixes#1072
Searching the session list forced every directory group to expand all
sessions (expanded: isFiltering) and hid the Show more button, so the
user's per-group preview fold was ignored during filtering. Stop
overriding the preview state while filtering and keep the Show more /
Show less control available.
Fixes#1068
* fix(cursor): nest ACP extension outcome so plan approvals aren't cancelled
Cursor's ACP blocking extension methods (cursor/ask_question,
cursor/create_plan) expect the JSON-RPC result to nest the outcome under
an `outcome` key, e.g. `{ outcome: { outcome: "accepted" } }`. The
adapter returned it flat (`{ outcome: "accepted" }`), so Cursor read
`response.outcome.outcome` as undefined and fell back to a cancellation
— an approved plan was relayed to the agent as `User cancelled`, making
plan mode unusable over HAPI for Cursor sessions.
Wrap every ask_question / create_plan response in the nested envelope
and add regression tests asserting the exact wire shape for the
affirmative approval -> CreatePlan path (plus approved_for_session,
reject, and abort).
Fixes#79
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cursor): continue task after CreatePlan Yes (plan→execute)
Nested ACP accept alone is not a complete fix: Yes unblocked create_plan
but the prompt turn still ended with the plan "done" and no execution.
Mirror Claude ExitPlanMode: on accept, leave plan/ask for an executable
mode and queue a continue prompt so the original user task keeps going.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cursor): sync runCursor enqueue mode after CreatePlan accept
Codex Major on #1097: setPermissionMode alone left runCursor's
currentPermissionMode stale, so the next user message could re-enter
plan/ask after Yes. Notify onPermissionModeChanged from CursorSession
so the enqueue source of truth stays aligned with the session.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Debian <heavygee@oos-linux.in.lockhouse>
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): exit scratchlist mode after successful promote-to-queue (#959)
After Send to queue accepts, call onExitScratchlistMode so the operator
can continue normal chat. Rejected sends keep mode on. Unit + Playwright
smoke coverage.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): add execStartedAt/execCompletedAt to ToolCard test mock
Upstream ChatToolCall gained exec timestamps; ToolCard.test.ts mock
was missing them and broke CI typecheck after rebase onto main.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Debian <heavygee@oos-linux.in.lockhouse>
Single-machine users no longer expand a redundant machine layer; with
multiple machines a chip filter bar (persisted, with hover health popup)
replaces the collapsible machine headers. Directory groups now render
top-level with machine-name suffixes when unfiltered. Also removes the
redundant session/project count header text.
* fix(cli): drop unknown SDK message types instead of passing them through
The SDK-to-log converter's switch had a fail-open default that stamped any
unrecognized SDK message with transcript base fields (parentUuid/sessionId/
userType) and forwarded it. Claude Code emits a tool_progress heartbeat every
30s for long-running tools, so a single slow Bash call flooded the chat: the
web normalizer matches no known shape for those records and falls back to
rendering the raw envelope as message text.
Gate the switch on an explicit allowlist instead, bailing before the uuid is
allocated so a dropped event cannot advance sidechain/parent tracking -- the
heartbeats share one parent_tool_use_id and were overwriting the pointer a
subagent's next real message parents to. This matches the local launcher,
which already enforces the same allowlist via RawJSONLinesSchema.safeParse.
The default branch stays as a fail-closed guard so adding a type to the
allowlist without a matching case drops the message rather than leaking it.
* fix(cli): re-check reassembled text for internal event JSON at flush boundary
isInternalEventJson was only applied per incoming chunk. In delta mode
(OpenCode) every chunk is a fragment, so none of them parses as JSON on its
own and the filter never fires; the pieces accumulate and flushText emits the
reassembled envelope verbatim. The dedupe path has the same hole whenever two
chunks share no overlap.
Check again in flushText, which is the first point the complete text exists,
and tolerate surrounding whitespace so an envelope preceded by a newline is
not waved through by the leading-'{' fast path.
Genuine assistant output that happens to be JSON is unaffected: the matcher
still requires the specific { type: 'output', data: { parentUuid, sessionId,
userType } } envelope shape.
* fix(cli): fail closed on unrecognized agent message in converter
convertAgentMessage's exhaustiveness default returned the message object
itself at runtime. The never binding makes the branch unreachable today, but
every caller forwards a non-null result straight into the chat stream, so the
failure mode if it were ever reached is a raw object on screen. Keep the
compile-time check, return null at runtime.
* test(cli): cover command_lifecycle, a second unknown type seen leaking
Observed in the same session after tool_progress. The allowlist already
covered it with no code change, which is the argument for gating on known
types rather than adding a case per offender.
* feat(cli): export HAPI_SESSION_ID into wrapped agent env
Publish the hub session id into process.env at session bootstrap so every
downstream agent spawn inherits it. HAPI runs one hub session per CLI process
(the runner forks a fresh hapi child per session; local is 1:1) and every
flavor's agent spawn derives its child env from process.env, so a single seam
covers claude / codex / cursor / gemini / opencode / kimi / grok / pi -
runner-spawned and local - plus future flavors, without touching each launcher.
Agents can read HAPI_SESSION_ID to self-target their own hub session over REST
or shell helpers without listing /api/sessions. Prefer the MCP display_image
tool for inline media when available; HAPI_SESSION_ID is the deterministic
fallback for non-MCP tooling.
Closes#1119
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(scripts): self-target hapi-display-image via HAPI_SESSION_ID
Teach the in-tree shell helper to use $HAPI_SESSION_ID for path-only /
self invocations: GET /api/sessions/:id directly instead of listing
/api/sessions. Explicit session prefixes keep the previous list path.
Gives #1119 a tangible now benefit - the tool that forced the wasteful
list-and-reverse-lookup dance no longer needs it inside a wrapped session.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): defer HAPI_SESSION_ID export until lazy Codex materializes
The provisional lazy-session id was exported at bootstrap before the hub
row existed, so path-only self-targeting (GET /api/sessions/:id) could
404 while materialization was still pending. Export on onMaterialized
instead, and await materialize in buildHapiMcpBridge before starting the
MCP server / spawning Codex so the agent inherits an id the hub can
resolve (and so hapiMcpUrl is persisted, not only local pending state).
Addresses Codex review Major on #1121.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Debian <heavygee@oos-linux.in.lockhouse>
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): preserve composer attachments across session switches
Persist composer files per session and restore completed uploads without
uploading them again. Clear attachment drafts alongside text after send and
cover restoration, isolation, and adapter reuse with regression tests.
Fixes#465
* fix(web): keep cleared attachment drafts tombstoned
Retain an empty in-memory cache entry until the queued IndexedDB delete completes so a fast remount cannot restore stale files. Add regression coverage for the clear/remount race.
* fix(web): defer attachment restore for inactive sessions
Only restore or clear attachment drafts while the session attachment adapter is available. Preserve saved files when an inactive session mounts without attachment support and add regression coverage.
* fix(web): use dedicated split breakpoint for compact tablets
Some compact Android tablets (e.g. OPPO Pad mini) report a landscape
CSS viewport below Tailwind's `lg` (1024px) despite having enough
physical screen space, so the sessions layout fell back to a single
column. Add a dedicated `split` breakpoint at 920px and use it for the
sessions split layout and the sidebar width/resize CSS, leaving the
global `lg` breakpoint (and all other pages) untouched.
* fix(web): cap sidebar width against viewport on compact split
A persisted sidebar width (up to 600px from resizing on desktop) could
shrink the detail pane to 316px at the new 920px split breakpoint, below
the previous 1024px worst case of 420px. Cap the sidebar width at
min(var(--sidebar-w), calc(100vw - 424px)) so the detail pane keeps at
least 420px down to 920px, with no effect on desktop.
* fix(web): seed sidebar drag from rendered width
When the compact-split viewport cap renders the sidebar narrower than the
persisted width, dragging the handle to shrink it had a dead zone until
the stored width fell below the rendered width. Seed the drag from the
sidebar's rendered width so it responds immediately; unchanged on desktop
where rendered and stored widths match.
